Weekend Project

Most normal pregnant women wash their lines or clean behind the refrigerator when the nesting instinct kicks in. I pull up the carpet and refinish the original 80 year old wood floor.

Wild Rag Tutorial


In my attempt to lessen the financial burden of Christmas this year I decided to make homemade gifts. This did help alleviate the cost but it also    added to my work load when I sat down with my list and figured how many gifts I needed to make. This being said however I found a few cool things to make from the heart and on the cheap. Here is one of the projects.

1 yard satin or silk fabric
“Ban Roll” ( also know as waste stabilizing material)

All in all it only cost me about $6 to make each one of these.

I used this tutorial to make the hems on my scarves.

TIPS: The Ban roll is found at a sewing center focused on clothing or tailoring. I had to order it online, it wasn’t at Micheals or JoAnns. Also I suggest just doing a test run on a piece of cotton to see how it works. I didn’t get it at first until I tried it and then it was awesome. Also I used a paperclip to keep the loose end of my roll in check. The earlier tutorial recommends buying a longer piece to use for bigger projects bu the excess tail was driving me nuts.


Step 1: Cut the silk into a 36×36 square. This is easiest done by folding up a corner as shown below.


Step 3: Follow the tutorial linked above to make your first hem stitch on one edge. Remember to pin on the right side of the fabric first. This was the hardest part for me. I couldn’t get my head around starting on the right side.

TIP: I put a heavy cotton pillowcase under my machine. This gave me a less slick surface to work on since the silk slides around a lot when pinning and sewing. It also helped because I could just slide the machine up and iron without having to get up to press hems. A major bonus when you are making 11 of these.


Step 4: Keeping using the baby hem all around the four edges of the scarf. This hem helps make a neat little corner also.  And you’re all done!

Travel Changing Pad


If you’ve ever been to a walmart and ended up with a little one that needs diaper change you understand the value of having something clean and sanitary to lay your little one on to change a quick diaper. This travel pad is modeled after one given to me at my baby shower for my first baby. I have used it so many times I need to sew up a new one for the next baby. From saving my seat cushions in the car from a major blow out to keeping my little one separate from less than clean surface this has been a baby must have. I have sewn two more for family and their new arrivals. They are quick and easy to whip up.

1/2 yard PUL ( you could also buy laminated cotton, it just needs to be waterproof)
1/2 yard coordinating cotton
3 inches sew on velcro

This pad measures 12 x 24. It folds into a handy size to fit in a diaper bag and will fit even my large 18 month old for a diaper change. The lower (pictured in brown) section is large enough to fit a huggies travel wipe case that comes in t he big box from costco but there is room to adjust here.
Step 1: Cut out a 13 x 25 in rectangle out of the cotton and PUL
Step 2: Pin the male velcro ( the grabby side) to the right side of the cotton rectangle in the center and about 5 inches from the bottom. Sew it in place. You can round the edges of the velcro to keep in kid friendly.
Step 3: Pin the female velcro ( the soft side) centered in the top of the PUL. Sew it in place.
Step 4: Pin the PUL and cotton right side to right side. Do not pint he bottom of the two fabrics.
Step 5: Sew the PUL and cotton together. Remember to leave the bottom open, like a pillow case. You will top stitch the wipe and diaper pocket into this hole later 🙂
Step 6: Turn right side out and press.
Step 7: Cut out a 13 x 26 rectangle in the cotton or coordinating color.
Step 8: Fold over and hem both the “long” sides of the fabric. Fold in half to form a large pocket. I like to slide my wipes case in and pin along the edge at this point. Then I know it will fit. Stitch along the pin line forming two pockets.
Step 9: Insert the raw edge of your “pockets” in to the open end of the pad. Top stitch along the edges securing the pockets.


You’re Done!